Innovate 3737 Bosch Wideband O2 Sensor LSU4.2 Innovate Replacement Bosch LSU 4.2 wideband o2 sensor for older Innovate LC-1 and LM-1 Wideband systems. This oxygen sensor is the exact same as the original Bosch 5 wire wideband that comes with the LC-1 setup. Great for replacing a damaged or worn out ..
Are you running rich or lean? Innovate oxygen sensors will monitor and tell you just what the facts are. These precision sensors collect and feed the data you need to aid in restoring accurate gauging your fuel mixture. They offer replacement Bosch LSU 4.2 and 4.9 sensors for their digital A/F ratio..
30-2131-50 - 50 PSIa or 3.5 Bar Brass Sensor Kit Accuracy: +/- 3% Full Scale over -40C to 105C includes Repeatability, Hysteresis and Linearity Operating Temp: -40C to 105C / -40F to 221F Burst Pressure: 100PSI Response Time: < 1ms Vibration:100 to 2000Hz, 20g Sinusoidal, 3 Axes Sensor Body: Bra..
AEM's Bosch 4.9LSU Wideband UEGO O2 replacement sensor kit includes only the sensor (with attached cable and male connector) and is intended to replace an existing mounted wideband sensor used with AEM Digital Wideband UEGO Air/Fuel Controller Part Number 30-4110. These sensors have a lase..
AEM's wideband UEGO air/fuel ratio sensor kit includes a Bosch 4.2 LSU Wideband UEGO sensor, connector plug, pins and plugs, and mild steel O2 bung. This kit is designed to be an installation kit for a sensor used with an AEM wideband air/fuel UEGO controller. These sensors have a laser-etched, cali..
30-2011 - 3/8" Water Temp Sensor Kit Accuracy: < 2°C / 3.6°F Operating Temp: -40C to 135C / -40F to 275F Resistive Range (Ω): See Table Dissipation Constant: 24 mW/°C. The ratio, at a specified ambient temperature, of the change in the power dissipation of the sensor to the res..
30-2012 - 1/8" Water Temp Sensor Kit Accuracy: < 2°C / 3.6° Operating Temp: -40C to 200C / -40F to 392F Resistive Range (Ω): See Table Dissipation Constant: 12 mW/°C. The ratio, at a specified ambient temperature, of the change in the power dissipation of the sensor to the resu..
30-2013: Temperature Sensor with 1/8" NPT Male Thread, High Performance DTM-Style Connector, Aluminum Bung, Connector & Pins 30-2013 - Temperature Sensor Kit Accuracy: < 1.5°C / 2.7°F Operating Temp: -20C to 150C / -4F to 302F Resistive Range (Ω): See Instructions Dissipation C..
PN 30-2050 is a RTD type EGT sensor with an inconel body, M14 x 6H. It includes an RTD temp sensor with male thread, a weld-on bung with female thread, connector and pins. Includes connector plug, weld-in bung, terminals and silicone wire seal..
AEM's wideband O2 UEGO AFR replacement sensor and stainless-steel, finned, stand-off bung kit includes only a replacement Bosch 4.2 LSU Wideband UEGO sensor and stainless steel tall manifold bung. It is designed for installation and use with the AEM 4-Channel Wideband UEGO Controller, and forced ind..
AEM's Exhaust Backpressure install kit is specifically designed for use with AEM's 4-Channel Wideband UEGO Controller to provide accurate air/fuel ratio readings from wideband O2 sensors that are mounted pre-turbo. The Exhaust Backpressure install kit is engineered to provide backpressure readings w..
PN 30-2065 is a K-Type, closed tip thermocouple sensor. It includes a closed tip TC sensor with an inconel sheath, 1/8" NPT compression fitting, and ring and terminal harness. NOTE: For the most accurate readings using a K-Type thermocouple sensor, see our 4-Channel K-Type Thermocouple Amp..
30-2130-15 - 15 PSIa or 1 Bar Stainless Sensor Kit Accuracy: +/- 1% Full Scale over -40C to 105C includes Repeatability, Hysteresis and Linearity Operating Temp: -40C to 105C / -40F to 221F Burst Pressure: 150PSI Response Time: < 1ms Vibration:100 to 2000Hz, 20g Sinusoidal, 3 Axes Sensor Body: S..